A variety of choices to suit each application.
Pre-assembled, ready to install - saves time on site.
All assembled models are factory tested up to 6 bar for quality assurance.
Choice of optional bowl fillers, water dispensing guns and accessories.
Restraining device available to prevent hose from overstretching into basin, which reduces abuse and helps meet Water Board regulations.
Super strong, food-grade, high-flow water hose.
AquaJet AJPR10-HM-BF1-S
AquaJet Pre-Rinse Spray. AJPR10 base / HANGMAN style / BF1 bowl filler / STANDARD gun
- Base: AJPR10
- Bowl Filler: 150mm bowl filler (BF1)
- Connection(s): (M) ½-inch
- Controls: Lever
- Model Range: AquaJet 10
- Mount: Deck mounted
- Pedestal: Single
- Spray Gun: Standard
- Style: Hangman
- Water Feed: Single Monobloc
Connection: ½-inch BSP male thread 50mm length
Height: 1050mm
Product weight: 4.23kg
Recommended dynamic water pressure range: 1.5 - 5 bar. Max hot water temperature 60°C
Product material: nickel plated brass, 304 stainless steel braided hose with EPDM lined inner hose
Flow rates tested at 3 bar dynamic pressure: 7.75 l/m
1 year parts warranty
If this tap or combination tap is installed so that its base is no lower than the spillover level of the receiving vessel (for example, a sink or washbasin), a Type AUK3 air gap is achieved which permits installation of the tap in any premises where backflow protection up to Fluid Category 5 is required at the tap.
Additional information
| Base | |
|---|---|
| Bowl Filler | |
| Connection(s) | (M) ½-inch |
| Controls | Lever |
| Model Range | |
| Mount | Deck mounted |
| Pedestal | Single |
| Spray Gun | Standard |
| Style | |
| Water Feed | Single Monobloc |
- ARE THERE MATCHING PRODUCTS AVAILABLE?
Yes, we have a range of AquaJet taps available.
- ARE AQUAJET PRE-RINSES TESTED BEFORE THEY ARE SENT OUT?
Yes, all AquaJet Pre-Rinses are pre-assembled and pre-tested to 6 bar.
- CAN AN AQUAJET PRE-RINSE HELP ME SAVE WATER?
Yes, our AquaJet Pre-Rinses are available with a range of water saving spray gun options, which could save up to 62%
- CAN I STILL USE AN AQUAJET PRE-RINSE IF I AM SHORT ON SPACE?
Yes, we offer a range of heights including Super Short. Please check individual product for dimensions.
- CAN I ADD A BOWL FILLER AT A LATER DATE?
We would recommend against adding bowl filler as this will void the warranty as the pre-tested joints will need to be 'broken' to add a bowl filler.
- CAN I CHANGE THE SPRAY GUN TO A DIFFERENT OPTION?
Yes, the spray gun can be changed to a different style of Mechline spray gun.
- HOW CAN I PREVENT THE HOSE FROM BECOMING OVERSTRETCHED?
A restraining device is available to prevent the hose from being overstretched into the basin, which reduces abuse and helps meet Water Board regulations.
- ARE THERE SPARE PARTS AVAILABLE?
Yes, complete spare parts are available.
